4-point inspection: a seller's guide
A 4-point inspection is a short insurance inspection of an older Florida home. It checks the roof, the electrical system, the plumbing and the HVAC. The buyer's insurer reads it before it agrees to write a policy. If it finds a problem, the buyer may not get coverage, and the sale can stall. A seller who knows what the inspector looks for can fix it first.
What a 4-point inspection checks
The name comes from the four systems it covers. The inspector looks at the roof, the electrical system, the plumbing and the heating and air conditioning. They note the age of each one, its type and its condition. Then they take photos and fill in a form for the insurer.
This is a narrow check. A full home inspection looks at hundreds of items, from doors to drainage. A 4-point inspection looks only at the systems most likely to cause a large insurance claim. So it is short, and the report is often only a few pages long.
The insurer uses the report to decide whether it will write a homeowners policy on the home. It can say yes, say yes with conditions, or say no. Some insurers also use it to set the price of the policy.
When Florida insurers ask for a 4-point inspection
Age is the usual trigger. Many Florida insurers ask for a 4-point inspection on homes around 30 years old or more. Citizens Property Insurance is one of them. Some insurers ask at 25 years, and some wait until 40. It varies by insurer, so the buyer's agent or insurance agent is the person to ask.
The age that counts is usually the age of the home itself. Still, the insurer also wants the age of each system. A 35-year-old home with a new roof, a new panel and new pipes can pass easily. A 20-year-old home with an old roof can still run into trouble on the roof alone.
If your home is near that age range, assume the buyer's insurer will want one. Plan for it before you list, not after you accept an offer.
Items that commonly cause a problem
Some findings come up again and again. On the electrical side, insurers look closely at Federal Pacific and Zinsco panels. They also flag aluminum branch wiring, knob-and-tube wiring and older cloth wiring. Double-tapped breakers (two wires under one screw) are another common note.
On the plumbing side, polybutylene supply pipes are a frequent problem. Many insurers will not write a policy on a home that still has them. Galvanized pipes can be an issue too, because they corrode from the inside. Any active leak, even a small one under a sink, will show up in the report.
Then there is the roof. A roof near the end of its life is one of the most common reasons a 4-point inspection goes badly. The inspector notes the age, the covering and any signs of damage or leaks. If the roof looks worn out, the insurer may refuse to write the policy until it is replaced.
Who orders the 4-point inspection
In most Florida sales the buyer orders it. The report is for the buyer's insurance, so the buyer pays for it and picks the inspector. It is often done on the same visit as the buyer's full home inspection.
That timing matters to a seller. The buyer usually has an inspection period in the contract. If the 4-point inspection comes back with a problem, the buyer may not be able to get insurance. Without insurance, the lender will not fund the loan. So the buyer can cancel during the inspection period, and the deal falls apart weeks after you thought it was done.
A seller can order one before listing instead. It costs a little up front. However, it tells you what a buyer's insurer will see while you still have time to act. You can fix the problem, price for it, or tell buyers about it from day one.
The wind mitigation inspection
The second insurance inspection most Florida buyers ask about is the wind mitigation inspection. It uses a state form, OIR-B1-1802, the Uniform Mitigation Verification Inspection Form. The inspector records how well the home is built to stand up to wind.
The form covers the roof shape, and hip roofs score better than gable roofs. It records the roof-to-wall connections, such as clips, single wraps or double wraps. It also covers how the roof deck is attached, whether there is a secondary water barrier, and what protects the openings. Impact windows and shutters count there.
This report does not decide whether a buyer can get a policy. Instead, it lowers the price. Section 627.0629 of the Florida Statutes requires insurers to offer discounts for these features. A strong wind mitigation report can cut a buyer's premium in a real way.
Why a wind mitigation report helps you sell
A wind mitigation report is commonly accepted for up to five years. If you already have one, you can hand it to buyers. They can give it to their insurance agent for a quote before they make an offer.
That helps you in two ways. First, buyers see a real insurance number early, which makes the monthly cost of your home clearer. Second, if your home has clips, a hip roof or impact windows, the report proves it. A buyer can compare your home with one down the street that has none of those features.
Check the date on your report. If it is close to five years old, or you have replaced the roof since, a new one may be worth ordering. Keep a copy with your 4-point inspection and your roof permit, so everything is in one place for buyers.
Who does these inspections and what they cost
Licensed professionals do this work. That includes home inspectors, general or building contractors, engineers and architects. Each insurer decides which licenses it accepts, so ask before you book. A report from someone the insurer does not accept is wasted money.
Costs vary by company and by area. Each inspection commonly runs about $100 to $200. Many inspectors offer the 4-point inspection and the wind mitigation inspection as a pair. They also often bundle both with a full home inspection at a lower combined price.
If you order your own before listing, ask the inspector for the insurer's form, not a general letter. Also ask how long the report is good for. Many insurers want a fairly recent 4-point inspection, and that window varies too.
If your 4-point inspection finds a problem
A seller has a few choices here. The simplest is to repair the item before closing, so the buyer's insurer sees a clean report. Another is to give the buyer a credit at closing so they can do the work after they move in. That only helps if their insurer will still write the policy first, so ask before you agree to it. A third is to price the home with the problem in mind and say so in the listing. Buyers then know what they are walking into, and fewer of them cancel late.
Another route is a cash buyer. A buyer who does not need a loan does not need a lender's approval of the insurance. Some cash buyers will still want insurance, but they are not forced to have it to close.
Repairs to electrical or plumbing usually need a licensed contractor and a permit. Keep the permit, the final inspection sign-off and the invoice. The buyer's insurer may ask for proof that the work was done properly. If a repair changes what you must disclose, or the contract terms are unclear, talk to a Florida real estate attorney.
How this works on a flat-fee listing
On a flat-fee listing you handle the buyer side yourself. Our brokerage places your home on the MLS and forwards buyer and agent enquiries to you. If you want to add a note about a recent 4-point inspection or a new wind mitigation report, ask for the change through the seller portal.
The Basic package is $99 for a three-month MLS listing with up to 12 photos. Premium is $295 for six months with up to 35 photos. Neither has a closing fee. Full-Service is $495 plus 1% at closing, and a licensed agent handles negotiation, contracts and showings coordination, including inspection requests.
If your home is 25 years old or more, get your reports in order before the photos go up. Then a buyer's insurer has fewer surprises, and so do you.
Common questions
Get your home on the Florida MLS for $99
All listings placed by a licensed Florida real estate brokerage (FL #CQ1049856) ↗ — verified via the Florida DBPR.